iFlight TITAN XL5 Analog 5inch 4S 6S FPV Drone BNF with SucceX-E F4 45A Stack/XING 2208 motor/ 5140 propeller for FPV Drone
In Stock
$366.99 – $395.99
BNF Parts list (Build)
- 1x TITAN XL5 4S 6S FPV Drone – BNF
- 2 sets Nazgul 5140 propellers
- 1x GPS Module
Additional Suggested Parts (optional)
- Battery 4S 1550mAh，6S 1300mAh
- Adjustable GoPro mount (0-60°)
Description：
- After our popular TITAN DC5 (DeadCat style frame) approach we decided to take a step back to the roots and create a new X-Geometry frame to get the best performance on both axis and better weight distribution for freestyle.
HIGHLIGHTS:
- 6mm arm design for more durability
- XING 2208 motors for more power
- GPS pre-installed for more safety at distance
- Variable GoPro TPU mount (supports ND-Filter inserts)
- 360° TPU protection and Antenna mounts
PRE-TUNED & PRE-SETUP:
- Don’t worry about tuning, we did that for you already! A basic PID- and Filter tuning was appplied for a great flight experience!
- GPS-rescure mode is configured and just needs to be enabled in your Betaflight Configurator! (Please be aware of how it works before you use it!)
- Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn’t end in a mess!
- Motor Power is configured to 70% throttle limit (scaled) by default to give more throttle stick resolution for an easy start on the 6S 1800kv version. Need more Power? Just enable 100% in the Betaflight Configurator to unleash the Beast!
FRAME // TITAN XL5：
- Weight ：145g
- Wheelbase: 250mm
- Main body dimension: 185*133mm
- Bottom to top distance: 30mm
- Arm thickness: 6mm
- Bottom plate thickness: 2mm
- Top plate thickness: 2mm
- Camera plate thickness: 2mm (2.5mm included TPU inserts)
ELECTRONICS // SucceX-E F4 Stack (45A 4-in-1 ESC)：
SucceX-E F4
- MCU：STM32F405
- IMU：MPU6000
- Betaflight OSD：YES
- Blackbox：8MB
- 4X Uarts（1 2 3 6 )
- 8 x Dshot/Proshot/Oneshot output
- 8 x individual ESC power/ signal pads
- 1 x Group of Gnd/Vbat/M1/M2/M3/M4/Cur/TX
- VTX protocol：YES（IRC Tramp）
- WS2812 led Strip：YES
- Baro：No
- Beeper：YES
- Input：2-6S（Max 8S）
- BEC：5V/2.5A cont
- Firmware :betaflight_4.0.5_BETAFLIGHTF4.hex
SucceX-E 45A 4in1
- Dimension: 40*43mm
- Mounting Holes: 30.5*30.5mm/Φ3mm
- Weight:14.4g
- Supports 2-6S Lipo input
- STM32F051 MCU, 48Mhz Runs BLHELI 16.X Firmware
- Current sensor: YES
- BEC: NO
- Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.
- Target: G-H-30 BLS 16.7
- BLHeliSuite download: http://www.mediafire.com/file/1tn449x6815upat/BLHeliSuite16714901.zip/file
| Weight | N/A |
|---|---|
| Receiver Protocol | ELRS, ELRS 915MHz, Frsky XM, PNP – NO Receiver, R-XSR, TBS Crossfire |
| Battery Version | 4S, 6S |
Based on 0 reviews
Be the first to review “iFlight TITAN XL5 Analog 5inch 4S 6S FPV Drone BNF with SucceX-E F4 45A Stack/XING 2208 motor/ 5140 propeller for FPV Drone”
Related products
-
Ready-To-Fly Drones, Micro RTF/BNF
T-Motor TRON 80 3S HD CineWhoop 1.6″ FPV Racing Drone
The TRON 80 Whoop HD is an FPV racing drone by T-Motor that is equipped with 4 RGB LED lights to bring cool visual effects to your flying experience! Excellent for indoor racing, small cinematic rigs, freestyle, and endless opportunities!
SKU: BS002-0035 -
Ready-To-Fly Drones, 5" Drones
iFlight Nazgul HD 5″ FPV Freestyle RTF w/ Caddx Vista HD System
The Nazgul 5″ BNF/ HD RTF by iFlight comes with the Caddx Nebula Pro HD FPV System. Featuring the new iFlight XL5 V5 FPV Frame, popular XING-E 2207 FPV Motors (6S 1800KV / 4S 2750KV), SucceX-E F4 Flight Controller, and SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC.
SKU: IF-0001
There are no reviews yet.